Tweco ArcMaster 401S Instrukcja Użytkownika Pobierz pdf (Strona 34)

ARCMASTER 401S POWER SOURCE

INSTALLATION, OPERATION AND SETUP 3-14 Manual 0-5345

WARNING

Before connecting the work clamp to the workpiece make sure the mains power supply is switched

off.

D. Select STICK mode by pressing Process Selection Button until the STICK or 6010 Process LEDs are lit.

STICK Welding Current Range Factory setting

Welding current l1

10 to 300 A (1 phase)

100

10 to 400 A (3 phase)

Table 3-8 STICK Welding Current

E. Arc ignition. Brieﬂy touch the workpiece at the point to be welded using the electrode and lift the electrode a

little. The arc burns between the workpiece and the electrode.

Graphic for SMAW (STICK)

I Current

I1 Welding current

ISt Hot start current

t Time

tSt Hot start time

Art # A-12457

Figure 3-7 STICK Current Routing Diagram

ARCMASTER 401S

Negative Welding

Terminal (-)

Work Lead

Electrode Holder

Positive Welding

Terminal (+)

Art # A-12555

Figure 3-8 Setup for STICK (SMAW) Welding

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 63 64

Brak uwag

Tweco ArcMaster 401S Instrukcja Użytkownika Strona 34