Tweco 9-9488 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Tweco 9-9488. Tweco 9-9488 User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 6
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Manual 0-4951
1
Original Publication Date: 2003 Manual no.: 0-4951
Revision Date: 5/05/2014 Revision: AJ
General Information
This kit is for use only with Victor Thermal Dynamics
XT-Series Torches. Do not use this kit with any other
equipment.
Read these instructions before starting the replacement
procedure. Keep these instructions for future reference.
CAUTION
Only a qualified technician should perform this
procedure.
Parts Supplied
The kits includes:
• TorchO-Rings
• CartridgeO-Rings
• CartridgeBafeO-Ring(xx-1022)
• VictorThermalDynamicsCat.No.9-4893O-Ring
Lubricant
• Instructions
Procedure
WARNINGS
Disconnect primary power at the source and bleed
down the system before starting this procedure.
1. Ifnecessary,raisethetorchawayfromthecutting
table to provide working room.
2. RemovetheShieldCupAssembly(includingthe
cartridgeassemblyandconsumables).
CAUTION
Use only Victor Thermal Dynamics No. 9-4893
O-Ring Lubricant (Christo Lube MCG-129) with
this torch part. Use of other lubricants may cause
irreparable damage to the torch.
Torch O-Ring Change
1. Find and open the bag labeled Torch O-Ring Kit.
Verify that you have a new O-Ring for each of
theonesbeingreplacedontheTorch.SeeIllustra-
tion.
Art # A-04066_AC
O-Rings
Cat. No. 9-3027
Cat. No. 9-3026
Cat. No. 9-3025
Torch Head
Cat. No. 9-9041
Torch View
2. Remove and discard each of the old O-Rings from
the Torch.
3. Cleaneachof theO-Ring grooveswitha soft
bristle brush or lint free cloth.
4. Find the large yellow O-Ring and place it on the
Torchwheretheoldonewas.DoNotLubricate
the yellow O-Ring.
O-Ring Kit No. 9-9488
for XT-Series Torch
Installation Instructions
BafeO-ring
not shown.
Przeglądanie stron 0
1 2 3 4 5 6

Podsumowanie treści

Strona 1 - Installation Instructions

Manual 0-4951 1Original Publication Date: 2003 Manual no.: 0-4951Revision Date: 5/05/2014 Revision: AJGeneral InformationThis kit is for us

Strona 2 - CartridgeBafeO-Ring

Manual 0-495125. Lubricateeachoftheredorpurple(blackonoldermodels)O-Ringswithathinlmofthelubricantprovidedwiththiskit.S

Strona 3 - Manual 0-4951

Manual 0-4951 3 CAUTIONUse only Victor Thermal Dynamics No. 9-4893 O-Ring Lubricant (Christo Lube MCG-129) with this torch part. Use of other lubr

Strona 4

Manual 0-49514Cartridge O-Ring Change 400 Amp1. FindandopenthebaglabeledCartridgeO-RingKit. Verify that you have a new O-Ring for each o

Strona 5

Manual 0-4951 5UsethefollowingCartridgeO-Ringscaletoverifyproper size.9-30309-30298-0561CARTRIDGE O-RINGSArt # A-09683_AC1 inchScale9-30288

Strona 6 - ASIA/PACIFIC

© 2012 Victor Technologies International, Inc. www.victortechnologies.com Printed in MexicoTHE AMERICASDenton, TX USAU.S. Customer CarePh 1-800-42

Komentarze do niniejszej Instrukcji

Brak uwag